🧿❥Instant and Easy Use: Instant use, no preheating needed; Just press the handle down for a few seconds (Vary according to the thickness of the bag) to seal different materials bags; The pilot lamp will go off when sealing is done. After this, we recommend to keep the handle pressed down for another 2-3 seconds to get best sealing results
🧿❥Upgraded and Longer Life: Our desktop manual impulse sealer is UPGRADED with pure copper transformer, premium electric heating wire and high temperature resistant cloth to double its working life and ensure better sealing; Multiple vents under the sealer also help facilitating heat dissipation to reduce overheating during continuous use
🧿❥8 Temperature Adjustment and Safe Use: 8 temperature selections for various bag thickness and materials; The sealing machine is non-toxic and odorless and with built-in fuse, it is very safe to use
🧿❥3 Models for Choosing: Sealing Length 8 inch/200mm and 12 inch/300mm and 16 inch/400mm, Sealing Width: 2mm and 3mm, Max sealing thickness 10mils for all
🧿❥Household MUST HAVE: Great for sealing PE/PP bags for handmade soaps/cookies/candies/snacks/handicrafts, also widely used in resturant, grocery store, supermarkets, retail, cafe shop, small factories etc.

Specification: Type: Impulse Heat Sealer Material: Plastic Color: Blue Size: 8 inch/12 inch/16 inch Weight: 615g Sealing Length: 8inch(200mm)/12 inch (300mm)/16 inch (400mm)Source: 110V / 50Hz Power: 300W (16 inch) Max sealing thickness: 10 mils Suitable for: PE/PP Bags Impluse Sealing for: Power-saving Sealing Width: 3mmHeat Time: 2-3s Plug Type: US Standard Package include: 1 x Heat Sealer 1x Teflon Tapes How to Use: 1. No power switch required (auto-control), link the AC power cord with socket, adjust heating time just according to the thickness of sealing-in material; Put the plastic bag on the sealing-in surface and press the handle, the circuit will automatically control heating time. The power will automatically shut down when the indicator light goes out. After 2-3 seconds, release the handle to finish sealing. 2. Any damage occurs during sealing is because of over-long heating time, please spin the rotary knob anticlockwise to shorten heating time. 3. Too-short heating time will cause unstable sealing. Please spin the rotary knob clockwise to lengthen heating time. 4. If the plastic bag sticks to rubber pressing board, it means the cooling time is insufficient. You must lengthen the cooling time after indicator light go off. Slightly late to release the handle. 5. Remain the heating time unchanged after adjustment, and no need to adjust it during continuous service. 6. Keep AC power cord always inserting on the socket, no electricity consumption when there is no sealing. Warm Prompt: 1. Always keep the sealing surface clean, avoid any residue oxidation on the surface to reduce ribbon heater and lifespan of heat-resisting fabric. 2. Don’t use wet cloth to scrub sealing surface. 3. Worn-out liner under ribbon heater will cause short circuit and finally damage the